|
|
| |
|
|
|
SD100 -
Technical Specifications |
| |
|
|
|
| INPUT |
| Power supply |
200-230Vac ±10% |
| Input frequency ratings |
50 - 60 Hz ±5% |
| Input power factor |
>0,98 (of fundamental) |
| Power supply lost |
<15ms (steady operation) |
| >15ms (autoreset) |
| |
|
| OUTPUT |
| Output voltage |
0V to 100% input voltage |
| Overload capacity |
150% for 60 sec |
| 200% for 1 sec |
| Frequency ratings |
0 to ± 400Hz |
| Efficiency (at full load) |
>98% |
| Modulation method |
Vector space technology |
| Carrier frequency |
Maximum 15kHz |
| |
|
| ENVIRONMENTAL CONDITIONS |
| Protection degree |
IP20 |
| Operation temperature |
-10ºC to +50ºC |
| Storage temperature |
-20ºC to +65ºC |
| Ambient humidity |
<90%, non-condensing |
| Altitude |
1000m |
| Altitude de-rating (> 1000) |
-1% per 100m; 3.000m max. |
| Vibration |
Maximum 5,9 m/seg2 (0,6G) |
| Installation site |
Environment with no corrosive gas, combustible gas, oil mist or dust. |
| |
|
| CONTROL |
| Control Method |
V/Hz control, Open loop vector control (sensorless) |
| Analogue inputs |
1 input 0-10Vdc, 1 input 0-20mA |
| Digital inputs |
5 programmable inputs |
| Analogue outputs |
1 output 0-10Vdc |
| Digital outputs |
1 programmable output relay (2A, 30Vdc, 0,5A, 125Vac) |
| 1 open collector transistor programmable |
| Communication port |
RS485 and Modbus RTU protocol (optional) |
| Operation methods |
PID Control, motorized potentiometer,
3 wires control |
| Certified |
CE, ISO 9001, ISO 14000 |
| |
|
| DRIVE PROTECTIONS |
| Overvoltage |
| Undervoltage |
| Overcurrent |
| Ground fault |
| Drive overtemperature |
| Output phase lost |
| Overload |
| Communication error |
| Frequency reference loss |
| Hardware fault |
| |
|
| MOTOR PROTECTION |
| Motor overtemperature |
| Motor stall |
| Overload |
|
|
|
|
|
